My apartment, as you may
know, is small, tiny, miniscule, I’m
talkin about 900 square feet. With such a small space and an overabundance of “stuff”, I
need all the extra storage I can get. Not long ago I saw something on Pinterest
about making your own storage to fit between your wall and your refrigerator.
What a genius idea! I sat out to start the project, got some rough measurements
and even sketched out a plan. But, that plan never went through. I just didn’t have the time. So one day while I was looking over
some things we had posted on craigslist I was reminded of an old cd/dvd tower
that we’d been trying to practically
give away for weeks. And I realized that it was the perfect size for beside our
fridge! And it was SO simple, it only took about an hour and a half, and that
included the trip to Lowes. So here are the steps. Don’t worry, it’s
super easy and it doesn’t have to be
perfect!
What you’ll need:
DVD/CD tower (measure to
make sure it will fit beside your fridge).
1 – 2 pieces of 8 inch trim (any kind will do, but be
sure it has some thickness to the base so you’re able to screw it in without going through the wood).
½ inch long nails
4
Casters
Drill
Small hand saw
Total Time: 1 ½ hours
1.
Be sure to
measure your cd/dvd tower to be sure it’s
going to fit beside your refrigerator. Mine had a larger base at the bottom so
I simply unscrewed and removed it and used one of the extra wooden pieces in
its place.
2.
Screw in the
casters into the bottom four corners as pictured.
3. Measure &
cut trim – it should be the same length
as the shelves on your tower.
4. Use brackets to
attach trim to the shelves of the tower.
IMPORTANT:
Be sure when you start to screw the brackets into the trimming that you screw
into the thicker portion of the trim, so the screws do not puncture the other
side.
If your tower is like mine and the shelves
come out, then it’s much easier. Now,
this is where you can kind of play around. I decided to attach the trim
directly to the bottom of the shelves so that when I wanted to I could adjust
the shelves and the trim would just move with it. However, if you’d rather have the trim up a bit higher then play
around with the shelves and test out a couple of the products you know you’ll be storing on them. Adjust them to make sure they
are correctly spaced if you’re planning
on attaching the trim to the tower sides rather than the shelves. IMPORTANT: Be
sure when you start to screw the brackets into the trimming that you screw into
the thicker portion of the trim, so the screws do not puncture the other side.
You’re
Done! Now, you can paint the tower or leave it as it is. My husband liked the
zebra look of our with the black tower and the white trim so we decided to
leave it for now. You can go as simple or as creative as you’d
like. You can paint and even wallpaper or modgepodge the back board if you’d
like. I left one of the shelves off of mine so I could store extra cereal. Once I got it loaded down it fit great and
gave me a ton of extra cabinet
No comments:
Post a Comment